Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Fulton, MS

Graffiti Removal for Concrete in Fulton, MS

Pressure wash with a surface cleaner for concrete. Removing spray paint and marker from brick, concrete, stucco and stone, using removers matched to the surface. Typical cost $200-$800.

Graffiti Removal for Concrete is one of the jobs we do most often in Fulton, MS. Typical jobs cost $200-$800, and you approve the price before we begin. On concrete, the method we use is pressure wash with a surface cleaner.

Method and pressure

Pressure wash with a surface cleanerCleaning method
Usually 2,500-3,500 PSI with a rotary surface cleaner for even resultsPressure

Cleaning solution: A degreaser for oil spots and a pre-treatment for organic growth; post-treatment slows regrowth.

Cleaning concrete safely

Plain broom-finish concrete is the surface pressure washing is made for. A rotary surface cleaner gives an even finish without the stripes a wand leaves, and hot water helps with grease and oil.

Avoid: Holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete.

How often: Every year, or every 6 months in shaded, damp spots.

Is it time for graffiti removal for concrete?

  • Spray paint or marker on walls, fences or signs
  • Ghost marks left from earlier removal

Where the grime comes from

  • Vandalism
  • Shadowing left by paint that soaked into porous masonry

Safe steps for homeowners

  • Photograph it for your records or police report first
  • Don't paint over it with a color that won't match
  • Ask about anti-graffiti coatings for repeat targets

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Driving paint deeper into porous masonry
  • Damaging the surface with the wrong solvent
  • Leaving a 'clean' patch that stands out

What happens on the day

  1. Identify the paint and the surface
  2. Test a remover on a small area
  3. Apply remover and let it dwell
  4. Rinse with pressure suited to the surface
  5. Treat shadowing or apply a protective coating

Graffiti Removal for Concrete cost in Fulton, MS

$200-$800Typical range for a typical wall or tag area
1-3 hoursTypical time on site
As needed; fast removal discourages repeat taggingRecommended frequency

What moves the price:

  • Area and number of buildings
  • Scheduling: early-morning, overnight or weekend work
  • Whether wash water has to be recovered under local stormwater rules
  • Frequency: recurring service is usually priced lower per visit

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for concrete

Local graffiti removal for concrete for Fulton, MS

In Mississippi, commercial buildings and sidewalks often need cleaning several times a year, because mildew, gum and grime build up quickly in the heat.

Parts of Mississippi are exposed to hurricanes and tropical storms. After a storm, washing removes mud, debris and salt spray from siding, screens and walkways. Check for damage first: loose siding, broken screens and roof damage need repair before anyone washes them.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

Besides Fulton (ZIP code 38843), we handle graffiti removal for concrete in Tupelo (16.9 mi), Saltillo (17.1 mi), Guntown (18.5 mi) and Verona (18.6 mi). Call (555) 010-0000 for a free quote in Fulton.

Graffiti Removal for Concrete: frequently asked questions

How much does graffiti removal for concrete cost in Fulton, MS?

Graffiti Removal for Concrete typically costs $200-$800 for a typical wall or tag area, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for graffiti removal for concrete?

For concrete: usually 2,500-3,500 PSI with a rotary surface cleaner for even results. What we avoid: holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete. We keep the pressure even and controlled, with the right tools for the surface.

Is graffiti removal for concrete safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule graffiti removal for concrete?

Every year, or every 6 months in shaded, damp spots. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Fulton, MS

Patio Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$400

Concrete Sealing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $400-$1,200

Oil Stain Removal

Lifting oil, grease and fluid stains from driveways, garage floors and parking areas.

Typical $100-$300

Awning Cleaning

Cleaning fabric, vinyl and metal awnings on homes and storefronts to remove dirt, mildew and bird droppings.

Typical $150-$500

Fence Cleaning for Vinyl Fencing

Soft wash. White vinyl fencing shows green algae, mildew and sprinkler stains quickly.

Typical $200-$600

Commercial Pressure Washing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $400-$2,000

Pressure Washing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$600

Pool Deck Cleaning for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$500

Soft Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $300-$800

Rust Stain Removal

Removing orange rust stains from sprinklers, fertilizer, furniture and well water on concrete, siding and masonry.

Typical $150-$500

House Washing

A full exterior wash of siding, trim, soffits and eaves that removes dirt, cobwebs, mildew and algae.

Typical $300-$700

Patio Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$400

Ready for a cleaner home or business?

Get a free pressure washing quote in Fulton, MS. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote